Marsh water table height, logging data from the Typha site on the upper Parker River for June-August 2001

Methods: 


A transect of wells is established on the marsh platform, perpendicular to the marsh edge.  A total of 5 wells are dug to the depth of the water table under the marsh platform.  Wells 1-4 are spaced approximately evenly within the first 3m of shore, with well 5 approximately 20m upland from the marsh edge.  A tide gauge is placed at the river bottom directly in front of the transect.  Individual pressure transducers (Motorola MPX series) are used in each well (MPX5050) and in the tide gauge (MPX5100) at the river bottom to measure water height in terms of pressure.  Prior to deployment, each transducer is calibrated to determine the correlation between voltage output and water height. Once in the field, water height measurements, in terms of voltage, are recorded every 4 minutes by a HOBO H8 4-Channel External Data Logger (Onset Computers). Voltage readings are uploaded from the HOBO and are then converted to absolute water height above the river bottom.  



Well Location Information:

Well           ID                    Height of Marsh Surface Above Creek Bottom (m)                Horizontal Distance Upland of Creek Edge (m)

1            Pipe 2                                                 2.43                                                                                          0.2

2            Pipe 3                                                 3.06                                                                                          0.79

3            Pipe 4                                                 2.55                                                                                          1.47

4            Pipe 5                                                 2.82                                                                                          2.34

5            Pipe 6                                                 2.84                                                                                        19.56



Pipe 1 tide gage located on river bottom.

Marsh wells 1-5, numbered consecutively moving upland.



NOTES AND COMMENTS: Due to occasional equipment malfunction, readings are not continuous throughout the field season.

Variable Definition
Pipe 1 time Date and minute of water table height measurement
Pipe 1 Wy Height of water table above creek bottom at a given pipe location
Pipe 2 time Date and minute of water table height measurement
Pipe 2 Wy Height of water table above creek bottom at a given pipe location
Pipe 3 time Date and minute of water table height measurement
Pipe 3 Wy Height of water table above creek bottom at a given pipe location
Pipe 4 time Date and minute of water table height measurement
Pipe 4 Wy Height of water table above creek bottom at a given pipe location
Pipe 5 time Date and minute of water table height measurement
Pipe 5 Wy Height of water table above creek bottom at a given pipe location
Pipe 6 time Date and minute of water table height measurement
Pipe 6 Wy Height of water table above creek bottom at a given pipe location
Comments Information pertaining to individual data points Information pertaining to individual data points

Luquillo spider

A spider lurks under a leave

Read more

Sevilleta scapes

Sunset lights up the east side of the Sevilleta range

Read more

Common LTER Information Categories

Information categories commonly found when visiting LTER websites.

Read more